Spring Boat Care

Three Steps To A Cleaner Boat From The Makers Of Swobbit® Boat Cleaning Tools & Accessories

Published in the April 1921 Issue April 2021 News


1. Establish a routine cleaning program.
Rinse your boat after each use to remove salt and remember to dry it off. Take a few minutes to dry off morning dew or after a hard rain when possible. During your most active boating times, wash your boat at least weekly.

2. Choose your cleaning tools wisely.
There are plenty of products on the market and some will be better suited for your boat than others. Compare product features. Look for well-built tools that’ll last and hopefully make quick work of dirty jobs.

The handle is the most important product in any cleaning system. Look for a sturdy handle that adjusts easily and is comfortable to hold. The handle becomes an extension of your arm and will be subject to torque and pressure. Keep in mind it may see double duty as a boat hook or push pole, so it must be strong.

Choose the right brush for your cleaning application.

Note that some finish manufacturers don’t recommend using a brush. Use a softer brush than you think you need. The brush head should be made of durable UV stable material that’s not affected by moisture, chemicals or the salty environment.

Drying your boat after washing will eliminate spotting. Look for drying mops and cloths made from absorbent materials like PVA (holds up to 5x its weight in liquid) and products that remove water quickly without stripping wax. Opt for mops featuring wide strips of material (chamois work on surface area) - wider strips save time since they absorb more. Use squeegees made from silicone with flexible blades. Silicone doesn’t wear away or leave marks like a rubber can. Avoid metal squeegees for obvious reasons.
3. Roll up your sleeves.
When you’re ready to clean make sure you have everything you need. Must-haves include a hose (long enough to reach all areas of your boat) with a plastic spray nozzle. A telescoping handle, brush or washing pad, a drying mop, chamois or squeegee, and a couple of towels (for spot cleaning). You’ll need a good quality boat soap** and a bucket that’s large enough for your brush. Depending on the quality of your dock water a portable wash down system may be a good investment. Soft water reduces spotting and your cleaning time.
Never scrub a dry finish! Rinse the area first to loosen and remove dirt and debris. Always wash from the top down washing small sections and then rinsing. Don’t soap down the entire side of your boat in direct sunlight, it might dry before you can rinse it off. Some boaters wash and dry the section before moving on-- a good practice on larger boats

**A note on soaps - Choose a neutral pH, biodegradable, and environmentally friendly soap. Read and follow the recommended usage on the label - more is not better! Avoid dish detergents and high alkaline soaps. Many have grease-cutting agents that strip wax. Be careful when using “super concentrated” products. High concentrations of cleaning agents will strip your wax finish and can attack and damage finishes if left on for too long.

Enclosure care - If your boat has enclosures (clear soft and rigid vinyl panels) they require special care. Always rinse the enclosure thoroughly to loosen and remove debris before using a soft washing pad to gently clean the vinyl. Don’t use a brush on enclosures regardless of how soft it may feel. Check with the vinyl manufacturer before using polishes or waxes. For the most part, simply washing and drying (using a clean chamois or a water blade) is all you need to do.

Today’s zippers utilize advanced materials that are self-lubricating and don’t require additional lubrication. Using lubricants of any type will contribute to premature failure of the zipper by attracting dirt. If you need to lubricate snaps, hinges, etc. try a Chap Stick® (lip balm)! It’s cheap, not greasy - and it offers UV protection.

Add microfiber to your cleaning arsenal. Microfiber towels and products are a real-time and money saver. Micro fiber’s unique star-shaped fibers quickly remove dirt and grime without streaking or smearing and can clean without chemicals. Microfiber is perfect for cleaning, polishing, and detailing virtually every surface on your boat (except non-skid) and it’s great for electronics, computer screens, and enclosures. Micro fiber’s ability to clean using only water is not only economical it’s environmentally friendly.

Swobbit offers a complete range of boat cleaning products, available online and at marine retailers worldwide. For more information, visit https://swobbit.com.

  • Like what you read?

    Want to know when we have important news, updates or interviews?

  • Join our newsletter today!

    Sign Up
You Might Also Be Interested In...
Share

Send to your friends!

Already a subscriber? Please check your email for the latest full issue link.